Best Shoe Inserts for Heels & Flats — weight shifting in high heels

Six pain points in high heels are: Instability/wobbliness ('Call It Spring' sandals) ; Toes overhang (sandals); Ball of Foot Pressure('Steve Madden' mules) ; Heel Gaps & Heel Blisters ('Aldo' pumps) ; Heel Falling off Shoe (mules); Toes Crushed by Foot Sliding Forward (pumps) . All six of the pain points can be eliminated if the foot is held stable inside the shoe by shoe inserts that fit out of sight under the foot. To eliminate ball of foot pain the cushioning must be positioned directly under the centre of the ball of foot and must remain in place. It must...

To make the DIY insole/insert combination you will need three items. A pair of smooth thin stiff leather insoles (available from a shoe repair place or dept. store),  a set of PORON foam two part permanent high heel inserts (available from website  killerheelscomfort.com ) and a thin fabric covered foam insole with perforations (available from drug stores or dept store).  Cut the leather insole and the fabric covered insole to fit your boots. Adhere the PORON foam inserts on top of the thin stiff leather insole as if it was the insole of a high heel shoe (instructions are included...

1 Buy mules in the right size.    2  Look for mules that are designed properly for the function of walking.   3. The shoe design and style of the mules should support their function.  4.   Know your foot type for best fitting mules.  5. Mules that have high heels should be outfitted with two part foam PORON inserts specifically made for high heels to keep mules stabilized, keep the heel of the foot from slipping sideways off the heel of the shoe, and shift the wearers' weight off the ball of the foot. Low heeled mules or slides should have...

Many sources of pain in high heels can be eliminated by cushioning the foot with rebounding polyurethane foam that adds comfort to the ball of the foot and stops the foot from sldiing forward.  The three foot problems that are alleviated by inserts that keep the foot from sliding forward and cushion the foot with rebounding PORON foam are morton's neuroma, bunions and hammer toes. All of these problems are exacerbated by pressure that squeezes the forefoot or crushes the toes. When the foot is stabilized in place by KIller Heels Comfort cushions the toes have wiggle room and weight...